PC Products PC-Woody Wood Repair Epoxy Paste, Two-Part 48 oz in Two Cans, Tan 643334

Product Description PC-Woody is an epoxy paste formulated to replace missing and rotted wood. It has structural strength greater than most wood. PC- Woody is a permanent wood repair for interior and exterior applications. This epoxy is made from real wood and has many characteristics of wood. PC-Woody formulation provides extended working time, for large and critical jobs, which allows the user time to reposition work or make changes. High "wet grab" or tack of PC-Woody makes overhead and sidewall work easy without drip or sag. PC- Woody demonstrates excellent resistance to all weather elements, dry rot, UV light, fresh and salt water, and also chemicals present in pressure-treated wood. After cure paint, stain, drill, machine, sand, file, tap, or saw. Repair log homes, furniture, window and door sills and much more. Color (component a): Off white. Color (component b): Light brown. Color (mixed): Pine or tan. Work time (70 degree F): 30-40 Minutes. Tack free cure time: 90 Minutes. Cure for service: 24 Hours. Maximum cure: 7 Day. Gardner impact resistance: 100 In/lb. Elongation: 5-7 percent. Conduction (electric): Non conductive. Thermal shock: Excellent. Toxicity: Non toxic once cured. Heat range: -20 To 200 degree F. Tensile shear strength: 850 psi. Compressive yield: 2340 psi. Flexural strength: 1280 psi. Water absorption: 0. 44 percent. Weight (specific gravity): 0. 72 g/cm cube, 0. 42 oz. /in cube. Hardness shored: 50-55 (1wk). Heat deflection: 120 degree F. From the Manufacturer PC-Products, celebrating 75 years of “Fixing Your Things”, with quality, reliable repair products. Repair solutions for just about anything that needs repair or what you can manage to break. From Concrete to Wood restoration and heavy duty permanent repairs, we have you covered.Yeah; We can fix that

• Two-part epoxy paste to replace missing or rotted wood is resistant to dry rot UV light and fresh and salt water
• Can be used in indoor and outdoor applications with an application temperature range of 35 to 115 degrees F and a service temperature range of -20 to 200 degrees F
• High tack helps reduce drips and sags while hardening
• PC-Woody part B must be mixed with PC-Woody part A in equal volumes on a flat surface with a stiff putty knife; DO NOT ATTEMPT TO MIX WITH GLOVES
• Not recommended to mix PC-Woody in teaspoon size increments or smaller simply because of the likelihood of an ‘off-ratio’ mix
• Provides work time of 30 to 40 minutes (at 70 degrees F) to allow for adjustments
• Can be painted stained and machined after fully cured
• High "wet grab" or tack of PC-Woody makes overhead and sidewall work easy without drip or sag
• Excellent resistance to all weather elements dry rot UV light fresh and salt water and chemicals present in pressure-treated wood
• Note: PC-Woody will not bond to wax paper Teflon Polyethylene and some other plastics Test a small area when in doubt