CONFAST 5/8" (Inside/Screw 5/8" Diameter) Single Expansion Anchor (25 per Box)

ApplicationsThe anchor is made from Zamac . This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for use in a Moist environment.Hole Diameter/Bit DiameterThe anchor requires a 1" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Minimum EmbedmentThe minimum anchor embedment into the concrete is 2-5/8". Therefore, the anchor must be installed so that a minimum of 2-5/8" of the anchor is embedded into the concrete.Spacing between AnchorsEach anchor must be spaced a minimum distance of 10" from each other when measured center to center.Edge DistanceIt is very important not to install the anchor any closer than 5" from an unsupported edge of the concrete.

• PRE-ASSEMBLED-Ready to install; no setting tools required
• READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used
• INTERNAL THREADS-Bolt can be removed easily
• BOLT EXPANDS ANCHOR-No need for setting tools; fast and easy to install
• CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications